Difference between revisions of "PENG-CIJE2019-1"

From ArduinoInfo
Jump to: navigation, search
m
m
Line 88: Line 88:
 
<br/><br/><br/><br/><br/>
 
<br/><br/><br/><br/><br/>
 
===(Item 3&4)*****( WIRE STRIPPERS )*****===
 
===(Item 3&4)*****( WIRE STRIPPERS )*****===
 +
'''Wirestripper DURATOOL 22-16294'''
 +
[[Image:Wirestripper DURATOOL 22-16294.jpg]]
 +
 +
 +
'''Wirestripper PLATINUM TOOLS 15001C'''
 +
 +
[[Image:Wirestripper PLATINUM TOOLS 15001C.jpg]]
  
 
===***** ITEMS WE HAVE FOUND AND PRICED ARE MOVED DOWN HERE *****===
 
===***** ITEMS WE HAVE FOUND AND PRICED ARE MOVED DOWN HERE *****===

Revision as of 07:58, 20 July 2019

PENG-CIJE2019-1

ITEMS TO FIND FOR CIJE 2019

NOTE: ITEMS WE HAVE ALREADY FOUND AND PRICED ARE MOVED TO THE END OF THIS PAGE


(Item 1)*****( PENG: WE ARE READY: PLEASE GET/SHIP THESE ITEMS TO MAKE CIJE ROBOT KIT )*****

These items are used to make a 'kit' of hardware that is used in the CIJE ROBOT KIT (different than our Robot Kit). This is hardware you have supplied last year.

Each kit contains:

8 - 3mm standoffs with 8mm tall hexagonal body and 6mm long threaded post (brass)

6 - 3mm Hex Nuts (Steel)


HardwareRobotKit.jpg



(2019 QUANTITIES)

We need parts to make 400 of these kits:

8*400 = 3200 (get 3500) 3mm standoffs

6 * 400 = 2400 (get 3000) 3mm hex nuts








(Item 2)*****( ITEMS TO MAKE STEPPER MOTOR PULLEY KIT )*****

THESE ARE THE SAME ITEMS AS 2018

2019 QUANTITY:

400 Metal "Timing Pulley"

400 2mm Hex Key that fits the timing pulley

800 50mm long brass standoff

1000 M3 screws that fit the standoffs. Length 10mm. (Please check they fit)


( INFO IF NEEDED )

These items are used to make a small 'kit' which is added to our regular stepper motor so students can use it to lift things on a string. Details and photos below. Here is a photo of what that looks like:

Stepper-Standoffs-Spool-1-jpg.jpg

Stepper-Standoffs-Spool-3.jpg KiteStringOnStepper-600.jpg



This contains these items:

  1. A metal "Timing Pulley" that fits the 5mm shaft on our stepper motors. This is a usual part used on 3-D printers and should be easy to find.
  2. A "Hex Key" that fits the set screws in the Timing Pulley.
  3. two 50mm long brass "standoff" These are used to hold the stepper motor in place.
  4. two M3 screws that fit the standoffs. Length 10mm.



DETAILS BELOW:

(Kit item 1) 5mm Bore 20 Teeth Timing Pulley For 3D Printer Width 8mm or 6mm

Pulley-5mm-bore-20-Teeth.jpg


NOTE: The photo shows 5 pulleys, the kit has ONE

LINKS TO SUPPLIERS

BangGood

TAOBAO

(Kit item 2) 2mm Hex Key that fits the setscrews in the Pulley

This is the "L" shaped key in the photo above (NOT 3mm I had earlier)

(Kit Item 3) Two Brass Standoffs 50mm long, M3 thread

50mm-standoff.jpg

NOTE: Photo shows many; kit has 2

(Kit item 4) Two screws M3 thread 10mm length to fit standoffs

See Photo Above





(Item 3&4)*****( WIRE STRIPPERS )*****

Wirestripper DURATOOL 22-16294 Wirestripper DURATOOL 22-16294.jpg


Wirestripper PLATINUM TOOLS 15001C

Wirestripper PLATINUM TOOLS 15001C.jpg

***** ITEMS WE HAVE FOUND AND PRICED ARE MOVED DOWN HERE *****

JUMPER WIRES: Round pin

QUANTITY: 6000 (ALREADY ORDERED BY MARY ALICE)

We need these jumpers with different colors.. Maybe Blue, White,Yellow, Green (We have Red, Black)


NewJumpers.JPG








Small speaker with pin leads for PC board

QUANTITY: 400 (ALREADY ORDERED)

PCB-mount-speaker--Pin-type--diameter-23mm.jpg

Shenzhen HongSound Electronic Technology CO.,LTD (23mm diameter)