X10-Settings

From ArduinoInfo
Jump to: navigation, search

X10 SETTINGS - Various Devices


MS16A Motion Detector:

HOUSE: HOLD (Blinks=HouseCode) (Immediately press # of time for new Code)

UNIT: HOLD (Blinks=UnitCode) (Immediately press # of time for new Unit)</span>

MODE: Press the UNIT/OFF button once. The red LED flashes. Press and hold the HOUSE/ON button. </span>
(Immediately press # of time for new Mode)

Blinks
Dawn/Dusk
Motion Detection
Usual Use
1
Disabled
Day & Night
Indoor
2
Disabled
Night Only
OutDoor
3
Enabled
Day & Night

4
Enabled
Night Only


DELAY Until Lights Off:

  1. Press HOUSE/ON once. The red LED flashes. Press and hold UNIT/OFF. </span>
  2. (Immediately press # of time for new Mode)
  3. The total number of blinks represent the following delay times:</span>


Blinks
Minutes
1
1 - 60
Dial Setting
2
2
3
4
4
8
5
16
6
32
7
64
8
128
9
256