CIJE-RobotKit-2017

From ArduinoInfo
Jump to: navigation, search

CIJE Robot Kit 2017


UPDATE: PHOTOS 01/18/18 Robot Base plus Gearbox

HIGH-RES: CLICK
Robot011618-1.jpg
HIGH-RES: CLICK
Robot011618-2.jpg
HIGH-RES: CLICK
Robot011618-3.jpg
HIGH-RES: CLICK
Robot011618-4.jpg


UPDATE 8/12/17 : Robot on Base Version 2

  • Tamiya Gearbox holes align correctly
  • Switch snaps easily into the base
  • Paper removes much more easily than earlier version

CIJE-Robot-BaseV2-1024.jpg


DETAILS:

We were eventually able to settle on one machine screw fastener size: 3 mm Diameter 10 mm long.

However the ONLY fastener that we can find that will fit the Arduino holes in the Uno V3 layout is a standoff with a small hexagonal cross section. 3 major USA suppliers do not have machine screws or nuts that are that small in cross-section. Rumor has it that there is some Japanese standard that may be smaller. Maybe next year.

Fastener Bill Of Materials:


12 - 3mm diameter 10mm long pan head machine screws (steel)
8 - 3mm Standoffs with 8mm tall hexagonal body and 6mm long threaded post (brass)
6 - 3mm hex nuts (steel)

PHOTOS Of assembly:


standoffs-CasterWheel-1024.jpg
10mm Screws into 8mm high standoffs for caster wheel


CasterWheelMounted-1024.jpg
Caster Wheel mounted with 3mm nuts



10mmGearbox-ArduinoWithStandoffs-1024.jpg

Arduino mounted on 8mm standoff (with 10mm screw), with 8mm standoff as 'nut'
Tamiya Gearbox mounted with 10mm long 3mm screws, 3mm nuts


CIJE-RobotKit-2017-Text-5x625.jpg

Mechanically Assembled Robot Kit

This is the 2017 Robot Car kit label (Above)


terry@yourduino.com


zz